Showing the splendor of your quality,wear-resistant as well strong corrosion resistance and decorative effect,durable and beautiful in good taste.
Stainless Steel Coil & Strip | |
Grade | 201 202 304 304 304L 316 316L 316Ti 309 309S 310 310S 317 321 410 430 904L ... etc |
Thickness (mm) | 0.1 MM to 5.0 MM |
Width (mm) | 914, 1219, 1500, 2000, Customer specific strip |
Length (mm) | 1829, 2438, Customer specific length |
Finish | 2B, No.4, BA, No.1 (HRAP), Customer specific polish |
Standard coating | Paper interleaf, PE |
Optional coating | Laser, Deep drawing PVC |
Stainless steel coil and strip 0.45mm to less than 5.0mm - ASTM A240M
We from years of experience determined the popular range of grades, widths and thicknesses of stock to be held in its coil program to service customer demand. The standard range is as follows:
Grade | Finish | Thickness (mm) | Width (mm) |
304 | 2B,No. 4 PE | 0.55 | 914, 1219 |
304 | 2B, No. 4 PE | 0.70 | 914, 1219 |
304 | 2B, 2B PE, No. 4 PE, BA PE | 0.90 | 750, 914, 1219 |
304 | 2B, 2B PE, No. 4 PE, BA PE | 1.20 | 750, 914, 1050, 1219, 1500 |
304 | 2B, 2B PE, No. 4 PE | 1.50 | 914, 1219, 1500 |
304 | 2B, 2B PE, No. 4 PE | 1.60 | 914, 1219, 1500 |
304 | 2B, 2B PE, No. 4 PE | 2.00 | 914, 1219, 1500 |
304 | 2B, 2B PE, No. 4 PE | 2.50 | 914, 1219, 1500 |
304 | 2B, 2B PE, No. 4 PE | 3.00 | 914, 1219, 1500 |
304L | 2B, 2B PE | 4.00 | 1500, 2000 |
316 | 2B | 0.55 | 1219 |
316 | 2B | 0.70 | 1219 |
316 | 2B | 0.90 | 1219 |
316 | 2B,No. 4 PE | 1.20 | 1219 |
316 | 2B,No. 4 PE | 1.50 | 914, 1219, 1500 |
316 | 2B,No. 4 PE | 1.60 | 914, 1219, 1500 |
316 | 2B,No. 4 PE | 2.00 | 914, 1219, 1500 |
316 | 2B,No. 4 PE | 2.50 | 914, 1219, 1500 |
316 | 2B,No. 4 PE | 3.00 | 914, 1219, 1500 |
316L | 2B, 2B PE | 4.00 | 1500, 2000 |
430 | BA PE, No. 4 PE | 0.70 | 914, 1219 |
430 | BA PE, No. 4 PE | 0.90 | 914, 1219 |
3CR12 | 2B | 1.2 | 1250 |
3CR12 | 2B | 1.6 | 1250 |
3CR12 | 2B | 2.0 | 1250 |
AtlasCR12Ti | No. 1 | 3.0 | 1250, 1500 |
3CR12 | No. 1 | 4.0 | 1250, 1500 |
Other Grades and Widths
Grades: 201 202 304 304 304L 316 316L 316Ti 309 309S 310 310S 317 321 410 430 904L ... etc
Widths (mm): 600, 750, 900, 1050, 1200, 1524.
Fixed billing weights for flat rolled stainless steel
Thickness | Austenitic nominal mass (kg/m²) | Ferritic nominal mass (kg/m²) |
0.45 | 3.68 | |
0.55 | 4.50 | |
0.70 | 5.72 | |
0.90 | 7.36 | |
1.20 | 9.81 | 9.61 |
1.50 | 12.3 | |
1.60 | 13.08 | 12.85 |
2.00 | 16.35 | 16.02 |
2.50 | 20.44 | 20.03 |
3.00 | 24.53 | 24.04 |
4.00 | 32.71 | 32.06 |
Austenitic stainless steel theoretical weight is based on 8177kg/m³
Ferritic stainless steel theoretical weight is based on 8000kg/m³
Actual weights may vary from the above due to specific grade and dimensional tolerances.